To find out step-by-step instructions on how to use the Philips Coffee oil remover tablets, read our article below.
How do I use the Philips Coffee oil remover tablets?
Philips Coffee oil remover tablets (CA6704)
You can find and purchase the Philips Coffee oil remover tabs through our retailers. Ìý
Note: Using the Coffee oil remover tablets will not descale your espresso machine.
Instructions for espresso machines with pre-ground coffee function
- Switch ON the machineÌý
- Fill the water tank with tap water to the max indicator and place a cup under the coffee spoutÌý
- Put one coffee oil remover tablet in the pre-ground coffee compartmentÌý
- Select the pre-ground coffee functionÌý
- Select coffee and start brewing. When half a cup of water has been brewed, unplug the machineÌý
- Let the coffee oil remover solution act for at least 15Ìýminutes. Insert the mains plug back into a wall socket and switch on the machine. The machine will start heating up and perform an automatic rinse.Ìý
- Open the service door and remove the brew group.Ìý
- Rinse the brew group thoroughly with tap waterÌý
- Reinsert the brew group into the machine and put a cup underneath the coffee spoutÌý
- Select the pre-ground coffee function again and do not add any pre-ground coffeeÌý
- Select coffee and start brewing. The machine will dispense some water. Repeat this step twice.
Instructions for espresso machines without pre-ground coffee function
- Open the service door and remove the brew groupÌý
- Put one coffee oil remover tablet in a cup and fill the cup with 150Ìýml hot water. Wait until the tablet is completely dissolvedÌý
- Use the coffee oil remover solution to clean the filter of the brew group. Use a soft sponge or brush to clean the filter.Ìý
- After cleaning, let the solution act for 15 minutesÌý
- After 15Ìýminutes, rinse the brew group thoroughly with tap waterÌý
- Place back the brew group into the machine.Ìý
Instructions for espresso machines with Clean menu buttons
Ìý
If your machine has a "Clean" menu button, please follow the instructions below or view the video.Ìý
- Switch ON the machine.Ìý
- Tap the "Clean" icon and use the up and down arrows to select "Brew group clean".Ìý
- Tap "OK" and follow the instructions that appear on the screen.Ìý
Did these steps not solve the issue? Please contact us for further assistance.